S4 Quattro Wagon V8-4.2L (BHF) (2008)
![background image](/audi/s4_quattro_wagon/v8-4.2l_(bhf)/Page-3204001.png)
Navigation Function Selector Switch: Service and Repair
Function Selector Switch II
Function Selector Switch II, Removing And Installing
-
Turn off all electrical components.
-
Remove ignition key.
Removing
-
Open cigarette lighter cover - 2 -.
-
Press Function Selector Switch II E272 - 1 - out of installation opening from below as shown in illustration.
-
Disconnect connector at Function Selector Switch II E272.
Installing
-
Install in reverse order.