S4 Quattro Wagon V8-4.2L (BHF) (2008)
1
-
Instrument panel cover
2
-
Screw
-
Tightening torque 9 Nm
3
-
Screw
-
Tightening torque 9 Nm
4
-
Left support
-
Only on vehicles with knee bolster
5
-
Screws, (2x)
-
Tightening torque 9 Nm
6
-
Screw
-
Tightening torque 9 Nm
7
-
Right support
-
Only on vehicles with knee bolster
8
-
Screws, (2x)
-
Tightening torque 9 Nm
9
-
Driver-side storage compartment
Removal:
-
Remove instrument panel cover - 1 -.
-
Remove bolts - 2 - and - 8 -.
-
Pull storage compartment at top of instrument panel back and remove.
-
Unclip diagnostic socket.
-
Disconnect electrical harness connector at footwell illumination and, if necessary, disconnect additional loudspeaker. Auxiliary speaker,
removing
Installing: