S4 Quattro Wagon V8-4.2L (BHF) (2008)
‹› Removal:
-
Remove radio about 10 mm out of radio installation opening.
-
Remove A/C control head (E87).
-
Open front ashtray.
-
Remove front ashtray insert.
-
Vehicles with manual transmission: Pry shift cover up and remove selector lever boot. Refer to => [ Shift Cover and Shifter Boot ].
-
Vehicles with automatic transmission: Pry shift cover upward. Refer to => [ Shift Cover and Shifter Boot ].
-
Remove bolts - 2 - on ash tray.
-
Remove front ashtray upward.
-
Disconnect electrical connector.
-
Disengage trim - 3 - from ashtray.
-
Unclip storage compartment trim - 4 -.
‹› Installing:
To install, perform the steps used in removal in reverse order.
2
Screws, (Qty. 2)
‹› Tightening specification 5 Nm
3
Ashtray Trim
4
Storage Compartment Trim