S4 Quattro Wagon V8-4.2L (BHF) (2008)
![background image](/audi/s4_quattro_wagon/v8-4.2l_(bhf)/Page-3731001.png)
Utility Storage Compartment: Service and Repair
Parking Brake Lever Handle
Parking Brake Lever Handle
Removing
-
Pull up parking brake firmly.
-
Adjust driver's seat as follows:
‹› Move seat fully back
‹› Move seat surface fully down
-
Disengage retaining spring - 2 - in - direction of arrow A -.
-
At the same time, remove trim for parking brake lever handle - 1 - in - direction of arrow B -.
Installing
Installation is performed in reverse order of removal, noting the following:
-
Trim for parking brake lever handle must engage audibly.