S4 Quattro Wagon V8-4.2L (BHF) (2008)
‹› Removal:
-
Disengage parking brake.
-
Disengage trim on parking brake - 1 - and remove it.
-
Pull up parking brake firmly.
-
Remove two bolts - 3 - on carrier - 2 - and remove carrier.
‹› Installing:
-
Pull up parking brake firmly.
-
Place carrier on parking brake lever.
-
Next tighten bolts - 3 - by hand.
-
Disengage parking brake completely.
-
Tighten both bolts - 3 -.
-
Engage trim on parking brake - 1 - at rear in its mounts - 4 -.
-
Press trim on parking brake 1-- 1 - firmly.
2
Carrier
3
Screws, (Qty. 2)
‹› Tightening specification 1Nm
4
Trim Mounts