S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-775004.png)
-
Drive in sealing ring for power-steering pump drive using thrust piece (T40052).
-
Insert driveshaft - arrow - for oil pump into guide on oil pump.
‹› To guarantee that the driveshaft engages correctly in the oil pump, insert the driveshaft into the oil pump separately, do not install together with the
front bearing cap.
-
Cut tube nozzle at front marking (nozzle dia. approximately 1.5 mm).
-
Apply sealant beads - arrows - to clean sealing surfaces of spur gear unit as shown in illustration.