S4 Quattro Wagon V8-4.2L (BHF) (2008)
-
Rotate camshafts at hex head slightly back or forth if necessary so that camshaft locator (T40046) can be inserted.
-
If camshaft locator (T40046) cannot be inserted, rotate crankshaft 1 rotation (360°) further.
-
Remove camshaft locator (T40046) again.
-
Remove drain plug from upper section of oil pan.
-
Install crankshaft holder (3242) in the hole (20 Nm). Rotate camshaft back and forth slightly if necessary to completely center the holder.
-
Push glide track of chain tensioner for left timing chain in direction of - arrow - and pull off chain tensioner using a drill bit 3.3 mm in dia. - 1 -.