S4 Quattro Wagon V8-4.2L (BHF) (2008)
-
Remove bolts -1- and -2-.
-
Loosen hose clamps - arrows - and remove right coolant pipe from coolant hoses.
-
Disconnect electrical harness connector -2- on Engine Coolant Temperature (ECT) Gauge Sensor G2 / G62.
-
Remove nut -1- and remove electrical wiring harness at rear of coolant pipe.
-
Remove bolts - 2 to 5 -.
-
Remove rear coolant pipe.
Note:
^
Ignore -1- and -6-.
-
Remove mounting bolts - 1 to 4 - of combination valves for Secondary Air Injection (AIR) system.