S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-887013.png)
Installing
‹› Replace gaskets, seals and O-rings.
‹› During installation, all cable ties must be re-installed at the same location.
-
Using e.g. a rotating plastic brush, remove sealant residue on covers for timing chain and on cylinder block and head.
CAUTION!
Wear safety glasses.
-
Clean sealing surfaces, they must be free of oil and grease.
-
Cut tube nozzle at front marking (nozzle dia. approximately 1 mm).
