S4 Quattro Wagon V8-4.2L (BHF) (2008)
Alarm Module: Service and Repair
Radar Interior Monitoring Control Module 1
Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] See: Lighting and Horns/Service Precautions.
If control module is replaced, select "Replacement" function for appropriate control module in "Guided Functions" routine Vehicle diagnosis,
testing and information system VAS 5051.
Switch off ignition and remove ignition key.
Remove rear seat bench.
Remove nuts - arrows -.
Disconnect electrical connector - 2 -.
Remove the Radar Interior Monitoring Control Module 1 (G303) - 1 - from the floor panel.
Install in reverse order of removal, observing the following:
Install the rear seat bench.