S4 Quattro Wagon V8-4.2L (BHF) (2008)
1
-
Front passenger airbag unit
CAUTION:
-
Observe safety precautions for work on airbags.
-
Note assignment of airbag unit to instrument panel.
Removal:
-
Disconnect the battery ground (GND) strap.
-
Remove glove compartment.
-
Disconnect connector behind airbag unit.
CAUTION: Connector - 5 - (2-pin, red) on passenger airbag unit must not be disconnected under any circumstances.
-
Remove brace behind airbag unit.
-
Remove nut - 3 - (Qty. 4).
-
Remove airbag unit.
-
Lay airbag unit so padding faces upward.
Installing:
CAUTION: Note assignment of airbag unit to instrument panel Parts Catalog.
-
Install airbag unit.
-
Ensure connector behind airbag unit engages completely (audibly).
-
Turn on ignition.
CAUTION: No one should be in vehicle when connecting battery.
-
Connect battery ground (GND) strap.
NOTE:
-
Follow safety measures after connecting battery.
-
If the Airbag Malfunction Indicator Lamp (MIL) K75 shows a malfunction after assembly, DTC memory must be checked with Vehicle
Diagnostic, Testing and Information System VAS 5051 A, cleared and then rechecked.