S4 Quattro Wagon V8-4.2L (BHF) (2008)
![background image](/audi/s4_quattro_wagon/v8-4.2l_(bhf)/Page-2988013.png)
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
6
Bolt
‹› Tightening specification 3.5 Nm
‹› Self-locking
‹› Replace after each disassembly
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
7
Screws (Qty. 4)
‹› Tightening specification 3.5 Nm
‹› Self-locking
‹› Replace after each disassembly
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
Version 2
CAUTION!
Note safety precautions for working on airbags. Refer to => [ Airbag System Safety Precautions ] See: Service Precautions/Technician
Safety Information and side curtain airbags => [ Side Curtain Airbag Safety Precautions ] See: Service Precautions/Side Curtain Airbag
Safety Precautions.