S4 Quattro Wagon V8-4.2L (BHF) (2008)
Fuse Block: Service and Repair
9-Pin Relay Carrier
9-Pin Relay Carrier
Removing
-
Switch off ignition and remove ignition key.
-
Remove driver's storage compartment.
-
Remove nuts - 3 - and remove Vehicle Electrical System Control Module (J519) with wiring connected.
-
Remove 9-pin relay carrier - 4 -.
-
Unclip fuse panel at 9-pin relay carrier.
-
Detach relays and control modules and then unclip appropriate relay carrier.
‹› Check the exact assignment of 9-pin relay carrier in the current wiring diagram Wiring diagrams, Troubleshooting & Component locations.
Installing
Install in reverse order of removal, observing the following:
-
Install driver's storage compartment.
Tightening Specifications