S4 Quattro Wagon V8-4.2L (BHF) (2008)
Fuse Block: Service and Repair
3-Pin Relay Carrier
3-Pin Relay Carrier
Removing
-
Switch off ignition and remove ignition key.
-
Remove instrument cluster. Refer to => [ Instrument Cluster ] See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster /
Carrier/Service and Repair/Removal and Replacement/Instrument Cluster.
-
Remove driver's storage compartment.
-
Remove the screws - 1 - through the opening in the instrument cluster and then remove the 3-pin relay carrier - 2 -.
-
Unclip fuse panel at 3-pin relay carrier.
-
Detach relays and control modules and then unclip appropriate relay carrier.
‹› Check the exact assignment of 3-pin relay carrier in the current wiring diagram Wiring diagrams, Troubleshooting & Component locations.
Installing
Install in reverse order of removal, observing the following:
-
Install driver's storage compartment.
Tightening Specifications