S4 Quattro Wagon V8-4.2L (BHF) (2008)
-
Adjust toe accordingly by turning eccentric bolt - D -.
-
Install new nut - C - and tighten.
‹› The maximum adjustment range is 90° to left or right of center position.
‹› The geometric drive axle is automatically changed when individual toe settings are changed.
-
After tightening nut - C -, check toe value again.
Convertible only
-
Install diagonal brace. Refer to => [ Front or Rear Diagonal Braces ] See: Body and Frame/Frame/Structural Brace/Service and Repair/Rear
Suspension.
Continuation for all vehicles
-
Install underbody trim.