S4 Quattro Wagon V8-4.2L (BHF) (2008)
Seals and Gaskets: Service and Repair
09LA Transmission
Torque Converter Shaft Seal
Special tools, testers and auxiliary items required
‹› Extractor lever (VW 681)
‹› Thrust piece (T10137)
Procedure
-
Remove the transmission. Refer to: => [ Transmission, 2.0L TFSI ] , => [ Transmission, 3.2L FSI ] , => [ Transmission, 4.2L MPI ] See: Service
and Repair/Removal and Replacement.
-
Attach transmission to assembly stand. Refer to => [ Transmission, Securing to Assembly Stand ] See: Service and
Repair/Procedures/Transmission, Securing to Assembly Stand.
-
Carefully remove the torque converter.
-
Remove torque converter shaft seal with Extractor Lever (VW 681).
-
Apply ATF to circumference and sealing lips of oil seal.
‹› Installation position: The open side of the sealing ring faces the transmission.
-
Using Thrust Piece (T10137), drive in torque converter shaft seal as far as thrust piece stop.