S4 Quattro Wagon V8-4.2L (BHF) (2008)
![background image](/audi/s4_quattro_wagon/v8-4.2l_(bhf)/Page-1408003.png)
-
Drive in new oil seal as far as stop using thrust piece T10139.
-
Insert shim - 2 - and tapered roller bearing outer race - 1 - for differential onto stop in transmission housing by hand.
Note:
^
Make sure that shim and outer race are kept straight when inserting.
-
Replace O-ring - arrow -.
-
Install differential in transmission housing.
Note the following if the outer race for tapered roller bearing and the shim have dropped out of the final drive cover:
-
Lubricate shim and outer race for tapered roller bearing with gear oil and insert in final drive cover as far as the stop.
-
Tighten bolts of cover for final drive as follows.