S4 Quattro Wagon V8-4.2L (BHF) (2008)
![background image](/audi/s4_quattro_wagon/v8-4.2l_(bhf)/Page-1572002.png)
-
Insert ball hub into ball cage via two chamfers. The hub can be installed in any position. Press balls into cage.
-
Insert hub with cage and balls at right angle to joint.
Note:
^
When inserting make sure that the wide space - a - on joint housing is aligned with the narrow space - b - on the hub after swiveling in.
-
Install ball hub, whereby the hub must be swiveled out of the cage - arrows - far enough to allow the balls to fit into the ball tracks.