S4 Quattro Wagon V8-4.2L (BHF) (2008)
-
When the nut has been locked the radial run out on the drive shaft flange should be measured. Refer to => [ Driveshaft Flange Measuring Radial
Run Out and Marking ] See: Pinion Flange/Service and Repair.
-
When the nut has been locked the radial run out on the drive shaft flange should be measured. Refer to => [ Driveshaft Flange Measuring Radial
Run Out and Marking ] See: Pinion Flange/Service and Repair.