S4 Quattro Wagon V8-4.2L (BHF) (2008)
Windshield Moulding / Trim: Service and Repair
Windshield Trim
1
Right A-pillar trim
‹› Remove A-pillar trim.
‹› Remove door seal in A-pillar area.
‹› Remove nuts => [ (Item 7) Nut ].
‹› Bore out side hollow rivet heads => [ A-pillar trim, removing ] (Qty. 3), drive rivet shafts out and remove trim.
2
Roof frame trim
‹› Remove roof frame trim.
‹› Remove left and right A-pillar trim.
‹› To remove, remove nuts => [ (Item 3) Nut ] and trim.
3
Nut
‹› 6.5 Nm
4
Pop rivet
5
Retaining clamp