audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

FN-3 Front Brake Pads|Page 4660 > < FN-3 Front Brake Pads|Page 4658
Page 1
background image

Brake Pad: Service and Repair
Rear Brake Pads

Rear Brake Pads

Special tools, testers and auxiliary items required

‹› Torque wrench (V.A.G 1331)

‹› Vehicle diagnostic, test and information system (VAS 5051A)

Removing

‹› When removing, mark brake pads that will be used again. Install in the same position, otherwise braking effect will be uneven!

‹› Operating the electromechanical parking brake again after a long drive is recommended.

‹› Brake pad play is automatically adjusted every 1000 km if the EPB is not operated in this distance.

-

Connect vehicle diagnosis, testing and information system (VAS 5051B) or (VAS 5052) to 16-pin Data Link Connector (DLC) in vehicle with
ignition switched off.

-

Select parking brake with "address word" 53.

‹› Ignition on 

‹› Release parking brake 

‹› Coding check and report if necessary.

‹› DTC memory interrogated, errors shown corrected and DTC memory erased. 

Shown on VAS 5051B display:

FN-3 Front Brake Pads|Page 4660 > < FN-3 Front Brake Pads|Page 4658