S5 Quattro Coupe V8-4.2L (CAUA) (2009)
Brake Caliper: Overhaul
FN-3 Brake Bushing and Guide Pins
FN-3 Brake Bushing and Guide Pins
‹› When removing, mark brake pads that will be used again. Install in the same position, otherwise braking effect will be uneven!
Removing
-
Loosen brake caliper at the pins - 12 -.
-
Remove brake caliper.
Do not let brake caliper hang from brake hose. Secure it to the body with suitable cable ties or wire. Do not support weight with brake hose.
-
Remove bushing from brake caliper.
Installing
Installation is in reverse sequence.
-
Use new guide pins.