S5 Quattro Coupe V8-4.2L (CAUA) (2009)
-
Remove Locating Pins (T40116) with the Impact Puller (T10133/3).
-
Rotate intake camshaft to "TDC" and tighten camshaft adjuster screw - 2 - on camshaft with a socket SW 24 - 1 - inserted between.
‹› When tightening the bolt, use pliers to counterhold the socket.
-
Position a lever or ratchet with the Socket (T10035) on the bolt and turn the camshaft until the threaded hole for the Camshaft Clamp (T40070)
faces up.
-
Then install the Camshaft Clamp (T40070) loosely on the intake camshaft.