S5 Quattro Coupe V8-4.2L (CAUA) (2009)
-
Tighten the intake manifold bolts. Refer => [ Intake Manifold Tightening Sequence ] See: Description and Operation/Magnesium.
-
High pressure lines, installing => [ High Pressure Lines, Installing ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Supply
Line/Service and Repair.
Fuel Injectors
Special tools, testers and auxiliary items required
‹› Tool Set (T10133)
‹› The Puller (T10133/2) was changed and is now called the Puller (T10133/2-A). If the new tool is not available, the old one can be modified.
Modify the Puller (T10133/2) to create the Puller (T10133/2-A).
Special tools, testers and auxiliary items required
‹› Round file approximately 6 mm
-
File the semi-circle as shown in the illustration. The semi-circle allows the tool to slide farther onto the fuel injector. This provides the tool with a
larger contact surface.
-
Mark the modified tool with an "A" at the end of the tool number.