S5 Quattro Coupe V8-4.2L (CAUA) (2009)
Alignment: Service and Repair
Front Axle Toe, Adjusting
Front Axle Toe, Adjusting
-
Loosen lock nut - B -.
‹› Counter hold tie rod end - C - when loosening lock nut - B -.
-
Adjust toe on left and right-hand wheels at hex - A -.
Be sure that boot is not twisted after turning tie rods.
Twisted boots wear out quickly.
-
Tighten lock nut - B -, => [ Power Steering Gear ] See: Steering and Suspension/Steering/Steering Gear/Service and Repair/Removal and
Replacement/Power Steering Gear, and check toe-in value again.
After tightening lock nut - B - it is possible that the value deviates slightly.
If the measured toe lies within the tolerance, the adjustment is correct.