S5 Quattro Coupe V8-4.2L (CAUA) (2009)
Coolant Line/Hose: Service and Repair
Front Coolant Pipe
Front Coolant Pipe
Special tools, testers and auxiliary items required
‹› Drip Tray For Workshop Crane (VAS 6208)
Removing
-
Drain coolant. Refer to => [ Cooling System, Draining and Filling ] See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair/Procedures.
-
Remove fan shroud. Refer to => [ Fan Shroud ] See: Engine, Cooling and Exhaust/Cooling System/Fan Shroud/Service and Repair.
-
Remove bolts - arrows -.
-
Remove front coolant pipe from the engine and from the coolant pump.
Installing
‹› Tightening specifications. Refer to => [ Coolant Pipes Assembly Overview ] See: Coolant Pipes Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace O-rings.
-
Clean and/or smooth the sealing surfaces of the O-rings.
-
Coat O-rings with coolant and install them.
-
Install fan shroud. Refer to => [ Fan Shroud ] See: Engine, Cooling and Exhaust/Cooling System/Fan Shroud/Service and Repair.
-
Fill with coolant => [ Filling ] See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Procedures.