S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-75002.png)
Installing
Installation is in reverse order of removal. Observe the following when doing so:
‹› The camera visual area on the inside of the window must not be covered with condensation or dirty. If it is, clean the visual window by hand using
a cleaning solution.
‹› If the directional stabilization assistance control module (J759) is replaced, the camera and the control module must be re-calibrated => [ Lane
Assist Calibration Procedure ] See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Lane Assist Calibration Procedure.
