S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-173003.png)
‹› When installing the brake light switch, the plunger adjusts itself automatically.
‹› The brake pedal must remain in end position during installation and must not be moved.
‹› The brake pedal must be connected with the brake booster.
-
Insert brake light switch in mount on brake pedal and press it in lightly.
‹› The brake light switch must engage audibly with all three retaining tabs.
‹› The switch must not be rotated in the mount on the brake pedal.
‹› When installing the brake light switch, the plunger adjusts itself automatically.
-
Rotate colored piece on brake light switch to right as far as stop to secure switch.
-
Connect electrical connector.
-
Install driver side storage compartment - 1 to 3 -.
