S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-1320002.png)
-
Rotate the thumbwheel - 1 - on the Release Tool (T40148) clockwise as far as the stop.
‹› The piston - 2 - is pulled upward and the release tabs - 1 - on the Release Tool (T40148) spread - arrows -.
-
Remove the 12V socket from the illumination ring with the Socket Illumination (L42) using the Release Tool (T40148).
-
Disconnect the electrical connector.
Installing
Install in reverse order of removal, observing the following:
-
Remove the support - 1 - on the Release Tool (T40148).
-
Slide the piston down and hold it in place.
-
Rotate the thumbwheel - 4 - on the release tool (T40148) counterclockwise - arrow -. This loosens the release tabs - 2 - on the 12V socket- 3 - so
the Release Tool (T40148) can be removed.