S5 Quattro Coupe V8-4.2L (CAUA) (2009)
‹› When installing, make sure the bearing does not tilt.
-
Press bearing - 1 - into guide control arm - 2 -.
-
Note installation depth marking when installing - arrow -.
-
Check installation position of bearing - 1 - in guide control arm - 2 -.
A = ~ 90 degrees ± 5 degrees
-
Check rim offset of bearing - 1 - in guide control arm - 2 -.
Dimensions - a - and - b - must be identical.
-
If dimensions - a - and - b - are different, press bearing - 1 - in more.
-
Install guide control arm => [ Guide Link ] See: Guide Link.