S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-1590003.png)
‹› 25 Nm
‹› Always replace after removal
‹› Must be tightened in curb weight position => [ Lifting to Curb Weight Position ] See: Wheel Bearing/Service and Repair/Procedures.
20
Clamp
21
Rubber bushing
‹› When installing subframe, rubber bushing opening must face up.
‹› The stabilizer bar and rubber bushing must be free of grease when installing.
22
Stabilizer bar
‹› Removing and installing => [ Stabilizer Bar ] See: Stabilizer Bar.
23
Nut