S5 Quattro Coupe V8-4.2L (CAUA) (2009)
Wheel Bearing: Removal and Replacement
Wheel Bearing, Housing and Shock Absorber Assembly Overview
Wheel Bearing, Housing and Shock Absorber Assembly Overview
1
Drive axle
2
Backing plate
3
Bolt
‹› Tightening specification => [ Drive Axle ] See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair/Removal and Replacement/Rear Suspension/Drive Axle.
4
Upper control arm
5
Nut
‹› 95 Nm
‹› Always replace after removal
‹› Must be tightened in curb weight position => [ Lifting to Curb Weight Position ] See: Service and Repair/Rear Suspension/Lifting to Curb
Weight Position.
6
Eccentric washer
7
Bolt