S5 Quattro Coupe V8-4.2L (CAUA) (2009)
CAUTION!
Danger of damaging the shaft seals and the needle bearings in the dual mass flywheel.
‹› When removing and installing the clutch module, make sure the shaft seals and the needle bearing in the dual mass flywheel arrow are
not damaged.
‹› Replace the dual mass flywheel if the shaft seals or needle bearing are damaged.
‹› To prevent the clutch module from tipping, counter hold it at the bottom as shown in the illustration.
-
Remove the clutch module without tilting the input shaft - arrow -.
-
Set the clutch module down carefully, for example on the workbench.
Installing
Install in reverse sequence; note the following points: