S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-1090003.png)
-
Center the clutch disc - 1 - using the thrust piece (T40171).
‹› Clutch plate installation location: The toothed disc - A arrows - must face toward the pressure plate - 2 -.
-
Press the pressure plate - 2 - onto the alignment pin. The alignment pin - arrow C - must be flush in the pressure plate.
CAUTION!
The dual mass flywheel could be damaged.
‹› The dual mass flywheel - 1 - must only be supported by the support ring - arrow A - when tensioning the pressure plate - 3 - in the hydraulic
press.
‹› If the dual mass flywheel is supported on the transfer plate - 1 -, it will distort and be damaged. The dual mass flywheel must then be
replaced.
