S5 Quattro Coupe V8-4.2L (CAUA) (2009)
![background image](/audi/s5_quattro_coupe/v8-4.2l_(caua)/Page-1096002.png)
Install in reverse sequence; note the following points:
-
Lubricate the various bearing and contact surfaces with grease (G 000 450 02).
-
Insert the clutch pedal - 3 -, guide the bearing axle - 1 - through and engage it in the - direction of arrow A -. The securing tab - 2 - must engage
on the bottom of the pedal bracket.
-
Insert the mounting pins - 4 -. The shoulder on the pin - arrow B - must be guided into the groove in the clutch pedal.
-
Install the mounting bracket.
-
Over-center spring, installing => [ Installing ] See: Removal and Replacement/Over-Center Spring.