S5 Quattro Coupe V8-4.2L (CAUA) (2009)
![background image](/audi/s5_quattro_coupe/v8-4.2l_(caua)/Page-1125008.png)
- B - 32 mm socket
- C - toggle
-
Install the drive pinion nut using the number of turns noted earlier and tighten to the position marked - arrow -.
Performing measurement check - checking dimension " a" and dimension "b".
‹› The measurement may differ by ± 0.2 mm.
-
Install rear final drive, refer to => [ Rear Final Drive ] See: Service and Repair/Removal and Replacement/Rear Final Drive 0BD
(0B2A,0B6A,0B4A,0B5A Transmission)/Rear Final Drive.
-
Checking axle oil in rear final drive, refer to => [ Gear Oil in Rear Final Drive, Checking ] See: Fluid - Differential/Testing and Inspection/Rear
Final Drive 0BD (0B2A,0B6A,0B4A,0B5A Transmission).
Flange/Driveshaft and Seal with Rear Final Drive Removed