S5 Quattro Coupe V8-4.2L (CAUA) (2009)
-
Install the final drive cover with a new O-ring and tighten the bolts - arrows -.
-
Always replace the right flange shaft circlip - A -.
-
Clamp flange shaft in vise, using jaw protectors. Press circlip with new circlip - A - out of flanged shaft groove.
-
Drive the right flange shaft in using the centering mandrel (VW 295).
-
Rotate the clutch module - 1 - until the opening to the differential - arrow 3 - is seen.