S5 Quattro Coupe V8-4.2L (CAUA) (2009)
‹› Offset faces toward rear
10
Spacer tube
11
Shift lever support
‹› Removing and installing => [ Selector Mechanism ] See: Selector Mechanism.
12
Joint piece
‹› Between the selector rod and shift lever
13
Bolt
‹› For the joint piece => [ (Item 12) Joint piece ]
14
Bolt
‹› 23 Nm
15
Nut
‹› 10 Nm
16
Selector rod
17
Push rod
‹› With screw and washers
18
Nut
‹› 20 Nm
‹› Always replace
19
Bolt
‹› 4 Nm
20
Transmission shift lever
‹› Insert so that master spline aligns with shift rod
21
Sealing boot
22
Ball socket
23
Bushing
‹› To remove, remove retaining clip => [ (Item 26) Retaining clip ]
24
Connecting rod
‹› To remove, remove retaining clip => [ (Item 26) Retaining clip ]
25
Bolt
‹› 20 Nm
26
Retaining clip
27
Bolt
‹› 20 Nm