audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Shift Mechanism Installation Position|Page 4440 > < Shift Mechanism Installation Position|Page 4438
Page 5
background image

-

Remove the nuts - arrows - and the heat shield - 1 -.

-

Support the transmission using the engine/transmission jack (V.A.G 1383 A) with the transmission support (T10337) attached.

CAUTION!
There is the risk of an accident.

‹› The engine/transmission jack (V.A.G 1383 A) may only be used during assembly and must not sit unsupervised under the vehicle.

-

Remove the tunnel crossmember bolts - arrows -.

Shift Mechanism Installation Position|Page 4440 > < Shift Mechanism Installation Position|Page 4438