S5 Quattro Coupe V8-4.2L (CAUA) (2009)
‹› Turn right - the door window rotates inward
‹› Tighten the locking nut after adjusting.
-
Tighten the locking nut - 2 - after adjusting.
- 2 - Locking nut - 9 Nm
Door - 3 -
- 4 - Window regulator
B - Possible adjustment - Door top, rear
‹› For sliding the door window in the door window recess outward or inward
‹› Accessible after removing the door trim.
- 1 - Adjusting pins
- 5 - Door window
-
To adjust, loosen the locking nut - 2 - and rotate the adjusting pins using a Torx socket wrench.
‹› Turn left - the door window rotates outward
‹› Turn right - the door window rotates inward
-
Tighten the locking nut - 2 - after adjusting.
- 2 - Locking nut - 9 Nm
Door - 3 -
- 4 - Window regulator
C - Possible adjustment - door top, front
‹› The front window regulator is stationary, it cannot be adjusted.
- 3 - - Door
- 5 - - Door window
- 6 - - Window regulator nut - 9 Nm
D - Possible adjustment - door bottom, front
‹› The front window regulator is stationary, it cannot be adjusted.
Door - 3 -
- 6 - Window regulator nut - 9 Nm