S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-2797003.png)
‹› Rivet the guide rails beginning at the top.
2
Guide rail
‹› To remove, drill out rivet heads - 4 - and drive out rivet shafts.
3
Drip rail
‹› Press into the guide rail as far as the stop, beginning at the top and working toward the bottom.
‹› Check for flushness at the transition to the A-pillar.
Removing protective piping
-
With a new windshield - 1 -, protective piping - 2 - must be removed from molding - 3 - before installing plenum chamber cover - 4 -.
