S6 V8-4.2L (BBD) (2004)
Instrument Cluster: Service and Repair
Removal and Installion
Instrument Cluster, Removing and Installing
NOTE:
-
Do not disassemble instrument cluster
-
It is not necessary to remove the steering wheel to remove the instrument cluster.
Removing
-
Determining input values for replacing the instrument cluster.
-
Completely pull out steering wheel with the adjustment mechanism and move (adjust) downward.
-
Press cover -1- upward at side and then remove cover from instrument panel.
-
Remove Phillips head screws -1-.
-
Pull out instrument cluster toward front.
-
Cut cable ties at rear of instrument cluster.
-
Unclip securing latches of connectors and disconnect connectors.
Installing
Installation is reverse of removal, noting the following:
-
Connect electrical harness connectors and affix wiring harness to rear of instrument cluster with cable ties.
-
After installation, perform a function test of the instrument cluster.
-
If the function test is OK, enter the input values for the instrument cluster.