S6 V8-4.2L (BBD) (2004)
Brake Light Switch: Service and Repair
Round Housing
Brake light switch (round housing), removing and installing
Note: To ensure a secure fit, the switch may only be installed once.
Removing
-
Remove driver's storage compartment
-
Unplug electrical connector.
-
Turn brake light switch 45° counter-clockwise to remove.
Installing
Installation is carried out in the reverse sequence; note the following points:
-
Pull out plunger of brake light switch as far as it will go -arrow-.
-
Insert switch into its mounting so that retaining tabs -1- and -2- engage in corresponding slots and secure by turning 45°- clockwise.
Note:
^
Do not press brake pedal while installing switch.
^
The plunger in the switch is adjusted automatically when switch is inserted.
-
Check function of brake lights with brake pedal pressed and with pedal released.