S6 V8-4.2L (BBD) (2004)
Steering Column Lock: Service and Repair
Steering lock housing, removing and installing
Removing
WARNING:
^
Before removing steering wheel, wheels must be positioned in the straight-ahead position.
^
Observe safety precautions for working on airbags,
^
If these procedures are not observed, the airbag system may not function properly during vehicle operation!
^
Remove airbag control module.
^
Remove steering wheel.
^
Remove steering column switch
^
For vehicles with automatic transmission, disengage locking cable.
^
Drill out snap-off screws -1- or chisel out using appropriate chisel.
Lock cylinder, removing and installing
Installing
^
Install new snap-off screws.
^
Tighten snap-off screw until head breaks off
^
For vehicles with automatic transmission, engage locking cable.
^
Perform a function test of locking cable.
^
Install steering column switch
^
Install steering wheel.
^
Install airbag control module.