S6 V8-4.2L (BBD) (2004)
/Page-2678002.png)
^
Drive out tensioning pin -1- at transmission selector lever -2- in driving direction (arrow) until the transmission shift lever can be pulled off the
shift rod.
^
Push small screwdriver though seal and pull out seal.
Installing
^
Coat outer circumference and area between sealing lips with ATF.
^
Installation position: Open side of seal points toward transmission.
^
Slide new seal onto 3385 sealing ring installer and drive in to stop of 3385, and make sure not to cant seal while doing so.
^
Install multi-function Transmission Range (TR) switch -F1 25-.
^
Drive out tensioning pin in opposite direction via the lever while transmission shift lever is still removed.
^
Slide transmission shift lever onto the shift rod and drive in tensioning pin.
^
Remove left transmission support=.
