S6 Quattro Sedan V10-5.2L (BXA) (2007)
/Page-833003.png)
Work procedure
-
Remove rear engine cover - arrows -.
-
Lay aside fuel line and line to EVAP canister at air guide pipe.
-
Remove air guide hose from air filter housing, loosen hose clamp - 4 and 5 - to do so.
-
Lay aside air guide hose with wires - 2 and 3 - connected.
NOTE: Disregard - item 1 and arrows -.
-
Disconnect electrical harness connector - arrow - at Engine Coolant Temperature (ECT) Sensor G62.
NOTE: For clarity, depicted without engine.
Installation is performed in the reverse order of removal.
Electrical harness connector at Engine Coolant Temperature (ECT) Sensor G62, disconnecting - vehicles with 5.2l FSI engine
