S6 Wagon L5-2226cc 2.22L DOHC Turbo (AAN) (1995)
Drive Belt: Service and Repair
Exploded View
NOTE: Exploded view shows version without air conditioner.
1 - Fan -"FRONT" marking on outer ring must point in direction of travel
2 - Viscous clutch
^
Switch-on temperature: 76°C + 4°C (169°F + 39°F) ambient temperature at viscous clutch
^
Tightening torque (to bearing 17): 20 Nm (15 ft lb) left-hand threaded.
3 - Ribbed belt - Mark direction of travel before removing with chalk or felt pen and observe when installing. Opposite direction of travel on
used belt leads to its destruction
4 - Torque to 20 Nm (15ft lb)
5 - Hex flange - For turning engine by hand with open-end wrench (32 mm).
6 - Belt tensioner - To relieve tension on ribbed belt, swivel belt tensioner toward left side of vehicle with open-end wrench and secure with pin
3204
7 - Belt pulley for hydraulic pump