S8 Quattro Sedan V10-5.2L (BSM) (2009)
-
Pull steering column electronic systems control module (J527) - item 2 - and windshield wiper/washer switch (E22) - item 3 - off from steering
column switch module (SCSM).
-
Disengage cruise control switch (E45) - item 1 - from steering column switch module (SCSM).
-
Remove bolt - 5 - and remove retaining bracket - 4 -.
Installing
Install in reverse order of removal, observing the following:
-
Make sure all fasteners and electrical connectors are properly engaged.
-
Install the steering column switch module. Refer to => [ Steering Column Switch Module ]. See: Relays and Modules/Relays and Modules -
Steering and Suspension/Relays and Modules - Steering/Steering Column Control Module/Service and Repair/Steering Column Switch Module
Tightening Specifications