S8 Quattro Sedan V10-5.2L (BSM) (2009)
‹› Removing and installing, refer to => [ Balancing Shaft ] See: Balance Shaft/Service and Repair/Balancing Shaft
9
Bolt
‹› Replace
‹› 5 Nm plus an additional 90° turn
10
Power Take-Off Drive Chain
‹› Before removing, mark direction of rotation with paint. Reversing the rotation direction of a used chain can destroy it.
‹› Removing and installing, refer to => [ Power Take-Off Drive Chain ] See: Power Take-Off Drive Chain
11
Crankshaft
12
Power Take-Off Drive Chain Sprocket
13
Circlip