S8 Quattro Sedan V10-5.2L (BSM) (2009)
Installing
Install in reverse order of removal. Pay attention to the following:
-
Pay attention to correct assignment when plugging in connectors at Left Rear Warm/Cold Flap Air Outlet Motor V220 - 4 - and Right Rear
Warm/Cold Flap Air Outlet Motor V221 - 5 -.
-
Pay attention to correct assignment when plugging in connectors at Left Rear Center Console Temperature Sensor G311 - 7 - and Right
Rear Center Console Temperature Sensor G312 - 6 -.
4
-
Left Rear Warm/Cold Flap Air Outlet Motor V220
5
-
Right Rear Warm/Cold Flap Air Outlet Motor V221
6
-
Right Rear Center Console Temperature Sensor G312
7
-
Left Rear Center Console Temperature Sensor G311
8
-
Bolts (2x), 2 Nm
9
-
Bolts (2x), 2 Nm
10
-
Rear left air duct
Removing
-
Remove center console extension.
-
Remove extension-type center console.
-
Remove bolts - 8 - (2x).
-
Pull rear left air duct out of center console air distributor - 3 -.
Installing
Install in reverse order of removal.
11
-
Rear right air duct
Removing
-
Remove center console extension.
-
Remove extension-type center console.
-
Remove bolts - 9 - (2x).
-
Pull rear right air duct out of center console air distributor - 3 -.
Installing
Install in reverse order of removal.